QPST Tool Flashing Procedure



Posts : 811
Join date : 2016-06-26

QPST Tool Flashing Procedure

Post by .net on Thu Sep 01, 2016 4:33 pm

Software Upgrade:
1- Download the QPST tool & driver.
2- Make sure your device has the Power to support flashing.
3- Run QFIL tool.

4- Click on Browse under the Programmer path to select MBN File.

MBN File Format:

5- As soon as the MBN file is selected, Select Build will automatically select the Update or Stock ROM.
6- Click on Load XML, select rawprogram_unsparse_without_qcn.xml and then choose Patch0.xml
Load XML comes with two option:
a- rawprogram_unsparse_without_qcn.xml : On choosing this file, data will not be lost.
b- rawprogram_unsparse.xml : Will lose RF Calibration data, IMEI and WiFi/Bluetooth Address.

7- Switch off the device and connect it to PC by pressing Volume up & down key.
8- Click on Select Port and choose the port.

9- Click on Download to start flashing.

10- Unplug USB cable, when Finish Download appears.
Note: Do not unplug cable when Reset Phone or waiting for Reset Phone is in the process.

    Current date/time is Mon Sep 24, 2018 6:08 am